9 Story Building Walkthrough

In this walkthrough, we've got a nine story building. We've just created all the rooms in it. So there's really, it just says room for where every room name, without or throughout the model. So what this means is when we launch surfboard here, again, our flagship solution, that's going to save you 25% or more on your electrical design needs.

[00:00:22] This is going to go ahead and populate. Throughout the model, we're going to do our, receptacles lighting controls, and it really just helped you get through this project faster. So now that surfboard is up, we're going to populate receptacle. So we'll go ahead and just do our default menu here. We're going to choose just our standard duplex.

[00:00:50] We're just going to put two in each, every room or an input, a switch by each and every door. And again, this is just a brand new, simple model that's set up, that we're going to place devices throughout. So we'll just run these two solutions real quick in this nine story building, placing receptacles and light switches throughout the model.

[00:01:14] Right. We just says rooms. I haven't gone through and named anything. So if the models in that type of condition, right where room names haven't been established yet. this again, allows you to still quickly, easily go through with only just the room bounding, effectively being placed within the model. So like quick, easy way to get up and running with surf board.

[00:01:38] Again, to save you 25% or more on your electrical design needs and revenue. This is going to lay out all these outlets on every wall. In the room, it's going to put switches throughout and really allow you just to move so much faster through your rabbit projects. Simple, easy, right? It's a couple clicks.

[00:01:59] This was nothing, very hard or difficult to do again and have a Revvit family select, you know, how many want, for each room, device. Very, very simple, easy again, for a nine story building we're going to be done here. Um, probably an under a minute. To place these hundreds of devices, which will give you a count here in just a few minutes, right?

[00:02:24] So here in California studios, we feel your pain. We feel the low margins, the poor productivity, the crazy amounts of stress, big turnover within your electrical team, and just the challenge of finding qualified talent to bring into your organization. So that's why we developed our solutions here, ultimately to save you 25% or more on your electrical technology.

[00:02:48] Design needs will with sheets made simple to set up your sheets, your projects in really just a few seconds with surf board and skim board to do your electrical and technology design documents in minutes, and then our riser auto riser to create riser diagrams, towards the end of your projects, also in just a few seconds.

[00:03:12] So combining all of those into our productivity pack is really going to help you and your team. Move faster, design better and, really just blow the competition away. So again, it's chugging through here in this moment. So finding all the walls, all the doors, really everything that you need in your project to place devices.

[00:03:35] So we're going to still chug away here. Okay. Again, this is it's still four minutes in right. To be four minutes into a full design. Um, and then when this finish populating, we're going to have just a ton of devices throughout the building for you to, relocate. And really just to say that you have designed documents to put content within the model, which is a big portion of getting through design documents quickly.

[00:04:05] So again, save you 25% or more. That is our goal. That is our mission. And that is what we do. And we do it well here at Cal long studios. So again, we're walking through this and we're going to get you through design documents here in just a few minutes. Again, this is all real time. We're kind of, I'm not speeding anything up, just letting this run and letting it go, go.

[00:04:30] And I'm showing you exactly what is going on with surfboard, with our solutions in a brand new revenue model.

[00:04:44] throughout this entire process. You know, again, here we are, right? Three, four minutes, simple, simple solution, to get you populate it. And it's going through place in all these devices, nothing is faster. Nothing's going to get you through design documents. Nothing's going to place more content in your model faster than what we're doing here at Calhoun studios.

[00:05:08] throughout an entire model, getting you zero to 60 in just a few minutes. So as this, regenerates here again, you can see the model loading

[00:05:30] through this. Again. We want you to have a great experience. With our solutions with surfboard and you ultimately have to use them. So place, almost 1700 receptacles, 33 or 335 lights. Let's just do some quick math here. So, 1694 devices, plus three 35, 2000 devices in like five minutes. If we're going to move that fast, if you don't have surfboard.

[00:05:58] So, all right. Throughout our. Model, we have quite a few devices, right. And there might be some locations like here that you can just purely, filter it, say, Hey, all these fixtures we don't want. Right. Like it then becomes just a, a simple little editing process on what you do. You don't want, throughout your project.

[00:06:28] So again, you can like, will fixtures delete these. Throughout, if we don't want any in the stairs, they actually got named properly. Um, but again, going through and to actually say, you know, Hey, we, we do don't want these. That is easy way to go through your project quickly, easily, right? Like we've got all this content generated and now we can go through and edit where we want stuff where we don't.

[00:07:00] Very simple, easy to use solution throughout your rabbit model.

[00:07:09] Here we are. And let's apply our view templates. Let's say an architectural plan and then all this stuff is in. Okay. And view ranges. From the associate level, this is in metric apparently to the next level. So let's just apply it all. These two are

[00:07:51] there. We are.

[00:07:57] now we can see throughout all the content that has been generated in every single room, every instance throughout the project. So there you have it. Quick little walkthrough of surfboard, placing receptacles and lighting controls. Thank you for watching. And again, you can hit the link below to apply. to use surf board or go directly to the Cowabunga CEO site and invest in yourself, invest in your team and, start saving 25% or more.